The CA450 integrates the functionality of a loop calibrator like the CA11E with a digital multimeter like the TY520.
Features
Loop check functions • Simultaneous 24 V loop power and mA measurement • HART mode setting with loop power (250 OHM resistance) Generation functions • SIMULATE (SINK) function simulates transmitters • 4-20 mA span/step/auto-step/sweep output Measurement functions • High accuracy signal measurement: DC mA 0.05%/30.000 mA • Handheld DMM function • Peak/Hold function for DCS power peak-to-peak measurement • Dedicated sensor modes for direct reading of many sensor signal types Safer—helps eliminate ...
(2) Signal source: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse Measurement: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse Features: Highly accurate within 0.02% of the DC voltage range for source and measure. Source and measurement can be performed simultaneously. Vertical type with large-screen display.Loop power supply function (24 VDC at a load of up to 22 mA) It is possible to measure current in the mA range while supplying power.Sink function. Sweep functions that allow 3 types of continuous outputs. Options: CA150/SP1 includes: 94010 Idapter, 94015: NiMH Battery, 93027: Main Body case with strap
YPC4000 is a combination Calibrator / HART Communicator that reduces the time spent on field calibrations and the number of test instruments that have to
be carried into the field. The YPC4000 Series delivers the versatility of a modular calibrator and the convenience of HART communications in one handheld unit. Users can view up to four measurements simultaneously on the high resolution LCD or compare HART PV and AO values to corresponding values measured. Available sensor modules include a variety of differential, gauge, vacuum and absolute pressure as well as voltage, current and temperature. A voltage and current meter is integral to the base unit. All HART field devices can be configured, polled, and trimmed using HARTcommunications. ...
